scipy.optimize.

minimize#

scipy.optimize.minimize(fun, x0, args=(), method=None, jac=None, hess=None, hessp=None, bounds=None, constraints=(), tol=None, callback=None, options=None)[source]#

Minimization of scalar function of one or more variables.

Parameters:
funcallable

The objective function to be minimized:

fun(x, *args) -> float

where x is a 1-D array with shape (n,) and args is a tuple of the fixed parameters needed to completely specify the function.

Suppose the callable has signature f0(x, *my_args, **my_kwargs), where my_args and my_kwargs are required positional and keyword arguments. Rather than passing f0 as the callable, wrap it to accept only x; e.g., pass fun=lambda x: f0(x, *my_args, **my_kwargs) as the callable, where my_args (tuple) and my_kwargs (dict) have been gathered before invoking this function.

x0ndarray, shape (n,)

Initial guess. Array of real elements of size (n,), where n is the number of independent variables.

argstuple, optional

Extra arguments passed to the objective function and its derivatives (fun, jac and hess functions).

methodstr or callable, optional

Type of solver. Should be one of

If not given, chosen to be one of BFGS, L-BFGS-B, SLSQP, depending on whether or not the problem has constraints or bounds.

jac{callable, ‘2-point’, ‘3-point’, ‘cs’, bool}, optional

Method for computing the gradient vector. Only for CG, BFGS, Newton-CG, L-BFGS-B, TNC, SLSQP, dogleg, trust-ncg, trust-krylov, trust-exact and trust-constr. If it is a callable, it should be a function that returns the gradient vector:

jac(x, *args) -> array_like, shape (n,)

where x is an array with shape (n,) and args is a tuple with the fixed parameters. If jac is a Boolean and is True, fun is assumed to return a tuple (f, g) containing the objective function and the gradient. Methods ‘Newton-CG’, ‘trust-ncg’, ‘dogleg’, ‘trust-exact’, and ‘trust-krylov’ require that either a callable be supplied, or that fun return the objective and gradient. If None or False, the gradient will be estimated using 2-point finite difference estimation with an absolute step size. Alternatively, the keywords {‘2-point’, ‘3-point’, ‘cs’} can be used to select a finite difference scheme for numerical estimation of the gradient with a relative step size. These finite difference schemes obey any specified bounds.

hess{callable, ‘2-point’, ‘3-point’, ‘cs’, HessianUpdateStrategy}, optional

Method for computing the Hessian matrix. Only for Newton-CG, dogleg, trust-ncg, trust-krylov, trust-exact and trust-constr. If it is callable, it should return the Hessian matrix:

hess(x, *args) -> {LinearOperator, spmatrix, array}, (n, n)

where x is a (n,) ndarray and args is a tuple with the fixed parameters. The keywords {‘2-point’, ‘3-point’, ‘cs’} can also be used to select a finite difference scheme for numerical estimation of the hessian. Alternatively, objects implementing the HessianUpdateStrategy interface can be used to approximate the Hessian. Available quasi-Newton methods implementing this interface are:

Not all of the options are available for each of the methods; for availability refer to the notes.

hesspcallable, optional

Hessian of objective function times an arbitrary vector p. Only for Newton-CG, trust-ncg, trust-krylov, trust-constr. Only one of hessp or hess needs to be given. If hess is provided, then hessp will be ignored. hessp must compute the Hessian times an arbitrary vector:

hessp(x, p, *args) ->  ndarray shape (n,)

where x is a (n,) ndarray, p is an arbitrary vector with dimension (n,) and args is a tuple with the fixed parameters.

boundssequence or Bounds, optional

Bounds on variables for Nelder-Mead, L-BFGS-B, TNC, SLSQP, Powell, trust-constr, COBYLA, and COBYQA methods. There are two ways to specify the bounds:

  1. Instance of Bounds class.

  2. Sequence of (min, max) pairs for each element in x. None is used to specify no bound.

constraints{Constraint, dict} or List of {Constraint, dict}, optional

Constraints definition. Only for COBYLA, COBYQA, SLSQP and trust-constr.

Constraints for ‘trust-constr’ and ‘cobyqa’ are defined as a single object or a list of objects specifying constraints to the optimization problem. Available constraints are:

Constraints for COBYLA, SLSQP are defined as a list of dictionaries. Each dictionary with fields:

typestr

Constraint type: ‘eq’ for equality, ‘ineq’ for inequality.

funcallable

The function defining the constraint.

jaccallable, optional

The Jacobian of fun (only for SLSQP).

argssequence, optional

Extra arguments to be passed to the function and Jacobian.

Equality constraint means that the constraint function result is to be zero whereas inequality means that it is to be non-negative. Note that COBYLA only supports inequality constraints.

tolfloat, optional

Tolerance for termination. When tol is specified, the selected minimization algorithm sets some relevant solver-specific tolerance(s) equal to tol. For detailed control, use solver-specific options.

optionsdict, optional

A dictionary of solver options. All methods except TNC accept the following generic options:

maxiterint

Maximum number of iterations to perform. Depending on the method each iteration may use several function evaluations.

For TNC use maxfun instead of maxiter.

dispbool

Set to True to print convergence messages.

For method-specific options, see show_options.

callbackcallable, optional

A callable called after each iteration.

All methods except TNC, SLSQP, and COBYLA support a callable with the signature:

callback(intermediate_result: OptimizeResult)

where intermediate_result is a keyword parameter containing an OptimizeResult with attributes x and fun, the present values of the parameter vector and objective function. Note that the name of the parameter must be intermediate_result for the callback to be passed an OptimizeResult. These methods will also terminate if the callback raises StopIteration.

All methods except trust-constr (also) support a signature like:

callback(xk)

where xk is the current parameter vector.

Introspection is used to determine which of the signatures above to invoke.

Returns:
resOptimizeResult

The optimization result represented as a OptimizeResult object. Important attributes are: x the solution array, success a Boolean flag indicating if the optimizer exited successfully and message which describes the cause of the termination. See OptimizeResult for a description of other attributes.

See also

minimize_scalar

Interface to minimization algorithms for scalar univariate functions

show_options

Additional options accepted by the solvers

Notes

This section describes the available solvers that can be selected by the ‘method’ parameter. The default method is BFGS.

Unconstrained minimization

Method CG uses a nonlinear conjugate gradient algorithm by Polak and Ribiere, a variant of the Fletcher-Reeves method described in [5] pp.120-122. Only the first derivatives are used.

Method BFGS uses the quasi-Newton method of Broyden, Fletcher, Goldfarb, and Shanno (BFGS) [5] pp. 136. It uses the first derivatives only. BFGS has proven good performance even for non-smooth optimizations. This method also returns an approximation of the Hessian inverse, stored as hess_inv in the OptimizeResult object.

Method Newton-CG uses a Newton-CG algorithm [5] pp. 168 (also known as the truncated Newton method). It uses a CG method to the compute the search direction. See also TNC method for a box-constrained minimization with a similar algorithm. Suitable for large-scale problems.

Method dogleg uses the dog-leg trust-region algorithm [5] for unconstrained minimization. This algorithm requires the gradient and Hessian; furthermore the Hessian is required to be positive definite.

Method trust-ncg uses the Newton conjugate gradient trust-region algorithm [5] for unconstrained minimization. This algorithm requires the gradient and either the Hessian or a function that computes the product of the Hessian with a given vector. Suitable for large-scale problems.

Method trust-krylov uses the Newton GLTR trust-region algorithm [14], [15] for unconstrained minimization. This algorithm requires the gradient and either the Hessian or a function that computes the product of the Hessian with a given vector. Suitable for large-scale problems. On indefinite problems it requires usually less iterations than the trust-ncg method and is recommended for medium and large-scale problems.

Method trust-exact is a trust-region method for unconstrained minimization in which quadratic subproblems are solved almost exactly [13]. This algorithm requires the gradient and the Hessian (which is not required to be positive definite). It is, in many situations, the Newton method to converge in fewer iterations and the most recommended for small and medium-size problems.

Bound-Constrained minimization

Method Nelder-Mead uses the Simplex algorithm [1], [2]. This algorithm is robust in many applications. However, if numerical computation of derivative can be trusted, other algorithms using the first and/or second derivatives information might be preferred for their better performance in general.

Method L-BFGS-B uses the L-BFGS-B algorithm [6], [7] for bound constrained minimization.

Method Powell is a modification of Powell’s method [3], [4] which is a conjugate direction method. It performs sequential one-dimensional minimizations along each vector of the directions set (direc field in options and info), which is updated at each iteration of the main minimization loop. The function need not be differentiable, and no derivatives are taken. If bounds are not provided, then an unbounded line search will be used. If bounds are provided and the initial guess is within the bounds, then every function evaluation throughout the minimization procedure will be within the bounds. If bounds are provided, the initial guess is outside the bounds, and direc is full rank (default has full rank), then some function evaluations during the first iteration may be outside the bounds, but every function evaluation after the first iteration will be within the bounds. If direc is not full rank, then some parameters may not be optimized and the solution is not guaranteed to be within the bounds.

Method TNC uses a truncated Newton algorithm [5], [8] to minimize a function with variables subject to bounds. This algorithm uses gradient information; it is also called Newton Conjugate-Gradient. It differs from the Newton-CG method described above as it wraps a C implementation and allows each variable to be given upper and lower bounds.

Constrained Minimization

Method COBYLA uses the Constrained Optimization BY Linear Approximation (COBYLA) method [9], [10], [11]. The algorithm is based on linear approximations to the objective function and each constraint. The method wraps a FORTRAN implementation of the algorithm. The constraints functions ‘fun’ may return either a single number or an array or list of numbers.

Method COBYQA uses the Constrained Optimization BY Quadratic Approximations (COBYQA) method [18]. The algorithm is a derivative-free trust-region SQP method based on quadratic approximations to the objective function and each nonlinear constraint. The bounds are treated as unrelaxable constraints, in the sense that the algorithm always respects them throughout the optimization process.

Method SLSQP uses Sequential Least SQuares Programming to minimize a function of several variables with any combination of bounds, equality and inequality constraints. The method wraps the SLSQP Optimization subroutine originally implemented by Dieter Kraft [12]. Note that the wrapper handles infinite values in bounds by converting them into large floating values.

Method trust-constr is a trust-region algorithm for constrained optimization. It switches between two implementations depending on the problem definition. It is the most versatile constrained minimization algorithm implemented in SciPy and the most appropriate for large-scale problems. For equality constrained problems it is an implementation of Byrd-Omojokun Trust-Region SQP method described in [17] and in [5], p. 549. When inequality constraints are imposed as well, it switches to the trust-region interior point method described in [16]. This interior point algorithm, in turn, solves inequality constraints by introducing slack variables and solving a sequence of equality-constrained barrier problems for progressively smaller values of the barrier parameter. The previously described equality constrained SQP method is used to solve the subproblems with increasing levels of accuracy as the iterate gets closer to a solution.

Finite-Difference Options

For Method trust-constr the gradient and the Hessian may be approximated using three finite-difference schemes: {‘2-point’, ‘3-point’, ‘cs’}. The scheme ‘cs’ is, potentially, the most accurate but it requires the function to correctly handle complex inputs and to be differentiable in the complex plane. The scheme ‘3-point’ is more accurate than ‘2-point’ but requires twice as many operations. If the gradient is estimated via finite-differences the Hessian must be estimated using one of the quasi-Newton strategies.

Method specific options for the hess keyword

method/Hess

None

callable

‘2-point/’3-point’/’cs’

HUS

Newton-CG

x

(n, n) LO

x

x

dogleg

(n, n)

trust-ncg

(n, n)

x

x

trust-krylov

(n, n)

x

x

trust-exact

(n, n)

trust-constr

x

(n, n) LO sp

x

x

where LO=LinearOperator, sp=Sparse matrix, HUS=HessianUpdateStrategy

Custom minimizers

It may be useful to pass a custom minimization method, for example when using a frontend to this method such as scipy.optimize.basinhopping or a different library. You can simply pass a callable as the method parameter.

The callable is called as method(fun, x0, args, **kwargs, **options) where kwargs corresponds to any other parameters passed to minimize (such as callback, hess, etc.), except the options dict, which has its contents also passed as method parameters pair by pair. Also, if jac has been passed as a bool type, jac and fun are mangled so that fun returns just the function values and jac is converted to a function returning the Jacobian. The method shall return an OptimizeResult object.

The provided method callable must be able to accept (and possibly ignore) arbitrary parameters; the set of parameters accepted by minimize may expand in future versions and then these parameters will be passed to the method. You can find an example in the scipy.optimize tutorial.

References

[1]

Nelder, J A, and R Mead. 1965. A Simplex Method for Function Minimization. The Computer Journal 7: 308-13.

[2]

Wright M H. 1996. Direct search methods: Once scorned, now respectable, in Numerical Analysis 1995: Proceedings of the 1995 Dundee Biennial Conference in Numerical Analysis (Eds. D F Griffiths and G A Watson). Addison Wesley Longman, Harlow, UK. 191-208.

[3]

Powell, M J D. 1964. An efficient method for finding the minimum of a function of several variables without calculating derivatives. The Computer Journal 7: 155-162.

[4]

Press W, S A Teukolsky, W T Vetterling and B P Flannery. Numerical Recipes (any edition), Cambridge University Press.

[5] (1,2,3,4,5,6,7,8)

Nocedal, J, and S J Wright. 2006. Numerical Optimization. Springer New York.

[6]

Byrd, R H and P Lu and J. Nocedal. 1995. A Limited Memory Algorithm for Bound Constrained Optimization. SIAM Journal on Scientific and Statistical Computing 16 (5): 1190-1208.

[7]

Zhu, C and R H Byrd and J Nocedal. 1997. L-BFGS-B: Algorithm 778: L-BFGS-B, FORTRAN routines for large scale bound constrained optimization. ACM Transactions on Mathematical Software 23 (4): 550-560.

[8]

Nash, S G. Newton-Type Minimization Via the Lanczos Method. 1984. SIAM Journal of Numerical Analysis 21: 770-778.

[9]

Powell, M J D. A direct search optimization method that models the objective and constraint functions by linear interpolation. 1994. Advances in Optimization and Numerical Analysis, eds. S. Gomez and J-P Hennart, Kluwer Academic (Dordrecht), 51-67.

[10]

Powell M J D. Direct search algorithms for optimization calculations. 1998. Acta Numerica 7: 287-336.

[11]

Powell M J D. A view of algorithms for optimization without derivatives. 2007.Cambridge University Technical Report DAMTP 2007/NA03

[12]

Kraft, D. A software package for sequential quadratic programming. 1988. Tech. Rep. DFVLR-FB 88-28, DLR German Aerospace Center – Institute for Flight Mechanics, Koln, Germany.

[13]

Conn, A. R., Gould, N. I., and Toint, P. L. Trust region methods. 2000. Siam. pp. 169-200.

[14]

F. Lenders, C. Kirches, A. Potschka: “trlib: A vector-free implementation of the GLTR method for iterative solution of the trust region problem”, arXiv:1611.04718

[15]

N. Gould, S. Lucidi, M. Roma, P. Toint: “Solving the Trust-Region Subproblem using the Lanczos Method”, SIAM J. Optim., 9(2), 504–525, (1999).

[16]

Byrd, Richard H., Mary E. Hribar, and Jorge Nocedal. 1999. An interior point algorithm for large-scale nonlinear programming. SIAM Journal on Optimization 9.4: 877-900.

[17]

Lalee, Marucha, Jorge Nocedal, and Todd Plantenga. 1998. On the implementation of an algorithm for large-scale equality constrained optimization. SIAM Journal on Optimization 8.3: 682-706.

[18]

Ragonneau, T. M. Model-Based Derivative-Free Optimization Methods and Software. PhD thesis, Department of Applied Mathematics, The Hong Kong Polytechnic University, Hong Kong, China, 2022. URL: https://theses.lib.polyu.edu.hk/handle/200/12294.

Examples

Let us consider the problem of minimizing the Rosenbrock function. This function (and its respective derivatives) is implemented in rosen (resp. rosen_der, rosen_hess) in the scipy.optimize.

>>> from scipy.optimize import minimize, rosen, rosen_der

A simple application of the Nelder-Mead method is:

>>> x0 = [1.3, 0.7, 0.8, 1.9, 1.2]
>>> res = minimize(rosen, x0, method='Nelder-Mead', tol=1e-6)
>>> res.x
array([ 1.,  1.,  1.,  1.,  1.])

Now using the BFGS algorithm, using the first derivative and a few options:

>>> res = minimize(rosen, x0, method='BFGS', jac=rosen_der,
...                options={'gtol': 1e-6, 'disp': True})
Optimization terminated successfully.
         Current function value: 0.000000
         Iterations: 26
         Function evaluations: 31
         Gradient evaluations: 31
>>> res.x
array([ 1.,  1.,  1.,  1.,  1.])
>>> print(res.message)
Optimization terminated successfully.
>>> res.hess_inv
array([
    [ 0.00749589,  0.01255155,  0.02396251,  0.04750988,  0.09495377],  # may vary
    [ 0.01255155,  0.02510441,  0.04794055,  0.09502834,  0.18996269],
    [ 0.02396251,  0.04794055,  0.09631614,  0.19092151,  0.38165151],
    [ 0.04750988,  0.09502834,  0.19092151,  0.38341252,  0.7664427 ],
    [ 0.09495377,  0.18996269,  0.38165151,  0.7664427,   1.53713523]
])

Next, consider a minimization problem with several constraints (namely Example 16.4 from [5]). The objective function is:

>>> fun = lambda x: (x[0] - 1)**2 + (x[1] - 2.5)**2

There are three constraints defined as:

>>> cons = ({'type': 'ineq', 'fun': lambda x:  x[0] - 2 * x[1] + 2},
...         {'type': 'ineq', 'fun': lambda x: -x[0] - 2 * x[1] + 6},
...         {'type': 'ineq', 'fun': lambda x: -x[0] + 2 * x[1] + 2})

And variables must be positive, hence the following bounds:

>>> bnds = ((0, None), (0, None))

The optimization problem is solved using the SLSQP method as:

>>> res = minimize(fun, (2, 0), method='SLSQP', bounds=bnds,
...                constraints=cons)

It should converge to the theoretical solution (1.4 ,1.7).